|
XY2-CE and XY2-CH cable
pull switches provide for an  emergency stop to be signaled at any point
along a cable up to 165 feet in length. Typical applications include
conveyor systems, packaging, textiles, transfer machines, presses,
woodworking equipment and paint lines.
Operation is based on the taut cable principle. Cable must be tight
and have appropriate tension applied to set or reset the switch. Once
cable tension has been set, the device will open the N.C. positive
opening contacts if either the cable is pulled or if it should become
slack due to stretching or breakage. Normal stop versions are used
where a momentary, non-emergency signal is required at any point along
a cable.
Cable pull switches are frequently used in place of individual emergency
stop push buttons around a machine or conveyor. The cost of the cable
pull switch and installation is usually less than the cost of installing
individual emergency stop stations required to meet codes and standards.
As more individual emergency stop push buttons are required, using
a cable pull device becomes more atractive and cost-effective. An added
benefit is that the cable pull switch is available continuously along
the cable run and is easy for personnel to pull and operate.
Features and Benefits
- Cable lengths: XY2-CE 165 feet and XY2-CH 50 feet
- Rated IP67 with
booted reset push button
- Rugged metal enclosure
- Emergency stop versions - The NC contact opens the control circuit
and mechanically latches, and will remain latched in the open position
until an operator manually resets it
- Emergency stop versions have
N.C. positive opening contacts as standard
- Device will not reset
if out of adjustment
- Normal stop versions - Normal stop versions are used where a momentary,
non-emergency signal is required
- Normal stop versions do not latch
contacts open or include positive opening contacts
- Normal stop versions
are provided with snap action contacts for momentary stop
- Two body
styles available
- XY2-CE - Suitable for cable runs up to 165 feet.
>
Learn more...
- XY2-CH - Suitable for cable runs up to 50 feet.
>
Learn more...
|
|
